bocoran slot jarwo rtp live slot bocoran slot jarwo bocoran slot jarwo

How to Fix LG Dishwasher E1 Error

LG Dishwasher E1 Error

If you are noticing an LG dishwasher E1 error code, you may think that your dishwasher is done for. Fortunately, this is not always the case. If you notice an E1 error code on your appliance, there are a few steps you can try. What are a few solutions that can help you address and fix this code?

What Does the LG Dishwasher E1 Error Code Mean?

If you start this error code, this is an indication that the pump is not getting enough back pressure from the dishwasher. Without enough pressure, your dishwasher is not going to be able to wash your dishes properly.

Depending on the model, an E1 code could also mean that there is water leaking into the drain pan. As a result, a flood sensor has been triggered, causing the dishwasher to shut off.

If this E1 error is accurate, you could end up running your drain pump constantly, which can drive up your water bill. 


With all of this in mind, the most common cause of this error code is a leak in your drain hose. Even though this may sound like a serious issue, there are several solutions you can try. What do you need to check first? 

The Top Causes of this LG Dishwasher Error Code

A few common reasons why you might be getting this LG dishwasher error code E1 include:

  • Your dishwasher might not have been installed properly 
  • There might be too much detergent in the dishwasher
  • Or dishwasher detergent could be overloading the dispenser unit 
  • The dishes might not have been placed properly in the dishwasher during the most recent wash cycle 
  • There is a problem with the float motor in your washing machine 
  • There might be a leak present and the drain pan 
  • There could be at least present in the sump assembly 
  • The sump motor might not be working properly and could have to be replaced 

These are just a few of the most common reasons why you might be noticing an LG dishwasher error code E1. What are a few possible solutions to this issue? 

Solutions To Eliminate the Dishwasher Error Code E1

There are a few options you can try to get rid of this error code on your dishwasher machine. These include: 

Check the Drain Hose 

You need to make sure the drain hose has been installed properly. If the drain hose is positioned beneath the base of the dishwasher, this could cause the hose to drain too early.

Take a closer look at the house and make sure it is located a minimum of 10 inches away from the base. That way, the water is not safe and away from your dishwasher prematurely.

If you are unsure of how to check the drain hose, you should call a professional for help. This type of service can help you make sure the issue is addressed appropriately on the first attempt. 

Check the Door and Drain Pain

You also need to take a closer look at the dishwasher door and drain pan. Make sure there is no water leakage, as water leakage can be serious. Check the perimeter door for an ae error code. Make sure there are no droplets of hearing on the surface. Even a small leak could cause your LG dishwasher to show an E1 error code.

mugs in dishwasher

In addition, you should also take a closer look at the dishwasher door seal. You will need to do this while the dishwasher is off. Make sure the rubber seal is not broken. If there are any gaps present in the surface, this could be the cause of the error. 

Inspect the Dishes

You should also take a closer look at the dishes. Take a look at large pots and pan. Then they get in the way of the spinning arms.

If you are loading your dishwasher, place large items around the perimeter. You need to influence the water flow and direction in your dishwasher.

If the position is not correct, the excess water could start to build up.

Take a look at larger items you have in your dishwasher. If they are trapping any water, they could cause the dishwasher to overload while operating.

If you have questions about loading your dishwasher, take a closer look at the user manual. Make sure you are unloading the dishwasher correctly.

Double Check Your Detergent

Finally, you should also take a closer look at your detergent. If you are using too much detergent, you could be overloading the dishwasher. That might cause this error code to show up.

If you are using too much detergent, there might be too many suds in your washing machine. As a result, the motor and assembly lines could get clogged, causing your dishwasher to stop working.

Take a look at the manual, and make sure you are using the right detergent. If you can prevent excess suds from developing, you can keep your dishwasher working properly. 

Address Your Dishwasher E1 Code

Ultimately, this code could be showing up due to leaks, power issues, a panel problem, a breaker issue, or even due to wrong hoses. If you are noticing these codes on your dishwasher, you should check the tray, connections, and display to make sure all issues are addressed. Call a professional for any repairs you might need.

slot777 gacor
baccarat casino bocoran slot gacor slot server singapore